Full loft survey and report
We measure foam coverage, identify open cell or closed cell material, check timbers, wiring and ventilation, and send you a written scope with photos and a fixed price, usually within 48 hours.
Every job is priced as a complete package, so you are not chasing separate invoices for waste, access or clean-up. The survey defines the scope, and the fixed price covers everything below. Anything outside that scope, such as replacing damaged roof membrane, is quoted separately before we start.
We measure foam coverage, identify open cell or closed cell material, check timbers, wiring and ventilation, and send you a written scope with photos and a fixed price, usually within 48 hours.
Protective sheeting, sealed containment and a dust extraction unit run for the whole job. Foam debris leaves through the hose, not through your landing carpet, and the loft is vacuumed at handover.
Rafters and joists are hand-finished after cutting, and any mould or early rot we uncover is treated before we close up. We also clear old pest nesting where we find it.
All foam, dust and contaminated material is bagged, removed from site and disposed of through a licensed waste route. You get the waste transfer documentation for your records or your lender.
We photograph the finished roof void and provide a written method statement, so your buyer's surveyor can confirm the foam is gone and the timbers are sound without a second visit.
Attic spray foam removal in Sheffield is the controlled cutting, extraction and disposal of sprayed polyurethane insulation from a loft or roof void. Foam sprayed between rafters or across ceiling joists is not a surface you can scrape off with a scraper. We cut it back with an oscillating multi-tool and reciprocating saw, break the bond from the timber, then feed the waste through a dust extraction unit so the rest of your house stays clean. Open cell foam comes away quickly; closed cell foam is denser and takes longer per square metre.
Most Sheffield homeowners call us for one of three reasons: a mortgage lender has refused to lend against a foam-insulated property, the foam has shrunk and left gaps that make the insulation ineffective, or damp and condensation have started to rot the roof timbers underneath. Older stone-built terraces around Walkley and Hillsborough are especially prone to roof ventilation issues once foam seals the rafters. If you have searched for attic insulation removal near me Sheffield and found nothing but vague advice, our survey tells you exactly what is in your loft and what it costs to take it out.
Every job follows the same five stages, whether it is a single loft in Meersbrook or a row of rental properties in Attercliffe. You get a fixed price after the survey, and we do not start cutting until you have it in writing.
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Dry ice blasting machine
Freezes and cracks residual foam from delicate timbers where saw blades would cause too much damage. Used with dry ice pellets and full containment.
Sand blasting equipment
Strips stubborn foam residue from hard surfaces using sand blasting media. We deploy it selectively, always with sealed containment and extraction running.
Spray foam removal tool
Purpose-made cutting heads that break the bond between foam and timber without gouging the rafter face, keeping the structural wood intact.
Insulation vacuum
Pulls loose foam, dust and debris straight out of the loft into sealed bags, so nothing drifts down through the house.
Reciprocating saw
Cuts through dense closed cell foam in sections. We keep the blade clear of cables, pipework and rafters at all times.
Oscillating multi-tool
Hand-finishes the edges where foam meets timber, letting us get right back to bare wood in corners and around obstructions.
Dust extraction unit
Runs for the whole job, pulling airborne particles out of the loft and keeping the rooms below usable while we work.
Mechanical cutting and extraction
Our standard approach for bonded foam. We cut the foam back in manageable sections with reciprocating saws and multi-tools, feeding waste straight into the extraction hose. It works on open cell and closed cell foam alike and keeps the timber intact.
Dry ice blasting
For residual foam on delicate or irregular surfaces, dry ice pellets freeze the material until it cracks away. It avoids blade contact with fragile timbers and is useful around old roof membranes where cutting is risky.
Sand blasting media stripping
Where mechanical cutting leaves a stubborn film behind, we use sand blasting media to strip the surface back. It is contained and extracted, and we only use it where the substrate can take it.
Ventilation reinstatement
Once the foam is out, we check and clear the roof ventilation path so the void can breathe again. This is the step that prevents damp and condensation returning after the foam has gone.
01
What we do: We survey within 48 hours, cut out the foam across the roof void, and supply the photo record, method statement and waste transfer notes the lender needs. We work to the buyer's deadline where we can.
→ The surveyor signs the roof void off, the lender releases funds, and the sale completes without a price renegotiation for foam removal.
02
What we do: We survey all three properties in one visit, then work through them in sequence so tenants are disrupted as little as possible. Mould found on the battens is treated as part of the same job.
→ All three lofts are cleared and documented, the landlord has one invoice, and the properties are ready for re-insulation and letting.
03
What we do: We remove the failed foam completely, treat the affected timber, and check the ventilation path is clear. We then advise on a breathable insulation system suited to the property's age.
→ The roof void dries out, the timbers are sound, and the loft holds warmth again with insulation that actually performs.
04
What we do: We book a same-week slot, complete the removal in a day and a half, and leave the loft vacuumed and photo-ready. We hand over the paperwork on the final day.
→ The listing goes live with a clean, inspectable loft, and the first viewer's surveyor has nothing to flag.
Sheffield's housing stock splits into three rough groups, and each one behaves differently when foam is involved. The Victorian and Edwardian terraces around Crookes, Walkley and Sharrow have stone or slate roofs with tight eaves and limited ventilation, so foam seals them up and traps damp quickly. The interwar and post-war semis in Gleadless, Norton and Beauchief have wider lofts and more airflow, but the foam is often thicker and more heavily bonded. The stone-built properties out towards Bradfield and Worrall sit in wetter, more exposed conditions, and we see more timber decay there. Our winters are wet and our summers are humid, which is exactly the climate that punishes badly installed foam. We schedule most removals between October and March, before the spring selling season, because that is when mortgage surveys bite. If you need attic spray foam removal Sheffield South Yorkshire wide, we work across the whole city and can usually survey within 48 hours.
Crookes and Walkley
Tight Victorian roof voids with limited eave ventilation. Foam here traps damp fast, so we check timbers carefully and prioritise reopening the airflow path.
Gleadless and Norton
Post-war semis with wider lofts and thicker foam coverage. Access is usually straightforward, and most jobs complete in one to two days.
Stocksbridge and Deepcar
Exposed upland properties where wind-driven rain and colder temperatures accelerate timber decay under foam. Surveys here always include a close timber check.
Sheffield City Centre and Park Hill
Flats and converted buildings where loft access can be shared or restricted. We plan access and containment carefully before booking the work in.
Wet South Yorkshire winters trapping moisture under foam
Damp and condensation build against rafters through the winter months, so we treat mould and check timber condition on every job rather than assuming the wood is sound.
Older stone-built terraces with limited eave ventilation
Foam seals the few ventilation gaps these roofs have. We reinstate the airflow path as a standard part of removal, not an optional extra.
Heavily bonded closed cell foam in post-war semis
Denser foam takes longer to cut and extract, so we allow an extra half-day on these jobs and price accordingly at survey stage.
Foam that was meant to last forever often creates more problems than it solves. These are the issues Sheffield homeowners bring to us most often, and each one has a practical fix.
Problem
Your sale or remortgage stalls, the chain collapses, and you are stuck paying for a property you cannot move on from.
Our Fix
We cut the foam out, photograph the exposed timbers and provide the method statement and waste notes your lender's surveyor needs. Most Sheffield clients are back in the chain within a fortnight of the work finishing.
Problem
Insulation performance drops away, cold draughts return, and you are paying to heat a loft that no longer holds warmth.
Our Fix
We remove the failed foam completely rather than patching over it, then specify a breathable replacement system with a U-value you can actually verify. Patching shrunk foam just hides the problem for another winter.
Problem
Moisture trapped against rafters causes mould, soft timber and eventually structural repairs that cost far more than foam removal.
Our Fix
We cut back the foam to reopen the ventilation path, treat any mould or early rot we find, and check the roof membrane is breathing again. Catching it early in a Sheffield terrace usually avoids any structural work.
Problem
Any electrician or plumber who needs to work in the loft has to hack through insulation, risking cable damage and creating a fire risk.
Our Fix
Removing the foam restores clear access to services, typically 40-60mm of clearance along each rafter. Your next tradesperson can work safely, and any future inspection is straightforward.
Foam that was sold as a lifetime fix often becomes the reason a sale falls through. Removing it restores the roof void, satisfies lenders, and lets you insulate properly with a breathable system that suits the building.
Unblocks a stalled house sale
Mortgage refusal due to spray foam is the single most common reason we get called out in Sheffield. Lenders flag foam because they cannot inspect the timbers beneath it. Once the foam is out and the roof void is photographed, your buyer's surveyor can see exactly what they are lending against, and the chain starts moving again.
Stops hidden timber decay
Closed cell foam traps moisture against rafters and battens. In Sheffield's wet winters that moisture has nowhere to go, and we regularly find soft timbers and black mould under foam that looked fine from the loft hatch. Removing it reopens the ventilation path, and we treat any affected timber before we leave.
Restores a usable loft space
Foam sprayed across ceiling joists often buries cables, downlights and water tanks. Cutting it back gives you a clean, inspectable loft again, typically 40-60mm of clearance restored along each rafter, so you can board it, store in it, or have a plumber work up there without hacking through insulation.
Lets you insulate properly
Once the old foam is gone, we can specify insulation boards or a breathable mineral wool system that meets current building standards and actually performs. That means a warmer loft, fewer cold-bridge draughts, and a U-value you can put in front of a surveyor rather than a foam salesman's leaflet.
Google ★★★★★4.9
Surveyed our loft in Crookes on the Tuesday and had the foam out by Thursday. Fixed price, no extras, and they left the loft cleaner than they found it. The lender's surveyor signed it off without a second visit.
Google ★★★★★5.0
Three rental properties in Hillsborough, all with closed cell foam. One invoice, one point of contact, and they treated mould they found on the battens without charging extra for the discovery.
Checkatrade ★★★★★4.8
We had foam that had shrunk and was trapping damp in Woodseats. They explained exactly what was wrong, cut it all out, and the musty smell was gone within a week. Straight talking from start to finish.
Real answers to the questions we hear most often from local homeowners and property managers.
If you are searching for spray foam removal near me, we cover every Sheffield district from Stocksbridge to Darnall. Same crew, same method, and we can usually survey within 48 hours of your call.
View Spray Foam Removal near meWhen a survey or completion date is looming, our same day spray foam removal service gets a crew to your property at short notice. Call before 10am and we will confirm whether we can attend that day.
View same day Spray Foam RemovalOur 24/7 spray foam removal line stays open for urgent call-outs, including water ingress through foam-sealed roofs and emergency make-safe work. Ring any time and we will arrange the earliest possible visit.
View 24/7 Spray Foam RemovalResidential spray foam removal covers houses, bungalows and flats across Sheffield. We work around your family's routine, contain dust at source, and leave the loft ready for inspection or re-insulation.
View Residential Spray Foam RemovalCommercial spray foam removal handles larger roof voids in offices, workshops and retail units. We schedule out-of-hours where needed so your business keeps trading while the foam comes out.
View Commercial Spray Foam RemovalLoft spray foam removal is the core of what we do. Whether the foam sits between rafters or across joists, we cut it back, extract the debris, and restore a ventilated loft space you can actually use.
View loft spray foam removalRing us on 03335672543 between 8am and 6pm Monday to Friday, or leave a message out of hours and we will call you back first thing. We answer the phone, give you a straight answer on price and timescales, and book your survey on the spot. Most Sheffield surveys happen within two working days.
Phone
03335672543Address
30 Cambridge St, Sheffield City Centre, Sheffield S1 4HP, UK, Sheffield, South Yorkshire
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available